1 · Session setup
Also run (the supporting set)
- phyphox with the FIXED v2 logger (2,000,000-sample buffers) — start together if you want the 476 Hz gold-standard IMU alongside.
- Strava on your watch — GPS/speed ground truth (keep it off the phone).
- MTB Hangtime (optional, same phone) — airtime/turn ground truth; screenshots after.
- Voice memo — say "lap 1…, jump line lap 2…" as you ride; note mount orientation first.
Keep everything running through the climb back — laps are sliced from timestamps afterwards, never stop between laps.
2 · Calibrate (3 seconds)
Mount the phone the way it will ride, hold it still and level for 3 s facing the same direction as on the bike, then press start. This records the gravity baseline for lean/roll math.
Which phone axis points forward along the bike? (screen coordinates: +X = right edge while looking at the screen, +Y = top edge, i.e. away from you)
3 · Record the session
Keep the screen on and the tab in the foreground. Sensors stream while recording; laps and voice markers are noted in the session JSON from your timestamps.
Markers (voice memo memory)
4 · Export + supporting data
Your session is captured. Download the two files, then follow the support-data guide so the analytics engine can align everything.
Supporting data — do these too
- Strava FIT (the accuracy multiplier): phone browser → strava.com → log in → open today's activity → ⋯ → Export original (.fit) (or GPX). This adds independent GPS/speed/HR ground truth that makes cut-and-match and Golden Run work.
- Hangtime screenshots: Jumps + Turns tabs, whole list (scroll). Screenshot each.
- phyphox CSV (if you ran it): ⋮ → Export Data → CSV.
- Voice memo file from the recorder app.
- Upload everything to the Stage 0 Drive folder: open folder → + New → File upload. (Any Google account works — it's open for uploads.)
Files are named with session start time so the engine auto-matches them. Keep the phyphox logger running for the whole session if you want the high-rate IMU too.